I2M Eliminator for removing the ABS control unit for Yamaha YZF-R7 (2021–2026) – a clean ABS delete solution for your R7 track bike. For those who want to consistently tune their Yamaha R7 for the track!

The Yamaha YZF-R7 is a motorcycle that impresses on the racetrack primarily through balance, control, and clean handling. Those who build their R7 specifically for track use want to remove unnecessary components without risking issues with the vehicle's electronics. This is exactly what the I2M ABS Eliminator was developed for.

With this emulator, the original ABS control unit can be removed without triggering error messages in the control unit or affecting other electronic functions. Thus, the I2M Eliminator is a clean solution for riders who want to prepare their motorcycle technically sound and uncompromisingly for racetrack use.

Plug-and-Play installation without cutting or soldering wires

The I2M ABS Eliminator for Yamaha YZF-R7 is designed for a fully plug-and-play capable installation. No wires need to be cut, no connections soldered, and no changes to the original wiring harness need to be made. The ABS unit is removed, and the emulator is directly connected.

Especially with modern motorcycles featuring sensitive Electronics, this is a clear advantage. Because makeshift ABS removal often leads to warning messages or subsequent problems in other systems. With the I2M system, you opt for a technically clean and vehicle-specific solution.

Replicates important sensor signals for the remaining Electronics

A high-quality ABS eliminator must do more than just avoid errors. The I2M Eliminator replicates the relevant signals from the speed sensors so that other original systems of the motorcycle can continue to operate correctly.

Especially with a Yamaha YZF-R7, which focuses on controllable handling and modern Electronics, this is particularly important. This way, your modification remains not only light and tidy but also electronically clean and reliably implemented.

Advantages at a glance

• Fits Yamaha YZF-R7 (2021–2026)
• Plug-and-play installation without changes to the original wiring harness
• Prevents error messages in the control unit
• Supports the correct transmission of relevant sensor signals
• Very compact and lightweight design
• Designed exclusively for use on the racetrack

Who is the I2M ABS Eliminator the right choice for?

This product is ideal for you if:

• you want to specifically set up your Yamaha YZF-R7 for the track
• you are looking for a clean ABS delete solution without any DIY work
• you value plug-and-play and an untouched wiring harness
• you want to maintain a clean function of the remaining Electronics despite the removal of ABS
• you want to prepare your motorcycle functionally and weight-optimized for track use

Important Note

This product is intended exclusively for use on the racetrack and is not approved for public road traffic.

Our Conclusion

The I2M ABS Eliminator for Yamaha YZF-R7 (2021–2026) is the right choice for riders who want to prepare their motorcycle technically clean and without improvised solutions for track use. The plug-and-play installation, compact design, and secure electronic integration make it a convincing solution for professional R7 track bike conversions.